SUBMERSIBLE WASTEWATER PUMP TYPE ABS ROBUSTA

Efficient pumping solution for residential areas

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 50 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.

Main benefits

Easy to install as it requires few accessories
Hydraulics with Contrablock system or vortex impellers for blockage free operation
Low noise operation
Easy to lift by using the handle (weight-balance position)
Reduced energy consumption and low maintenance cost
Integrated float switch as an option (single-phase pumps up to 0.5 cv / 0.37 kW)

Main applications

Sewage and wastewater containing fecal matter
Removal of raw water and wastewater with viscous matter
Drainage of garages and flooded cellars
Pumping of liquid manure and slurry as fertilizers in agriculture

Main design features

Single-phase pump fitted with thermal protection, permanent capacitor or electronic switch with start-up capacitor
Protection type IP 68
Free solids passage: 20 to 50 mm
Ball bearings lubricated by insulating nontoxic oil
Housing in casting iron (EN-GJL-250: GG25) and stainless steel shaft (AISI 420)
Shaft sealing by carbon/ceramic mechanical seal
Power cord inlet sealed with rubber and epoxy resin
Standard 5 meter cable

Key characteristics

Capacities	Up to 60 m³/h / 264 US gpm
Heads	24 m / 79 ft
Temperatures	40°C / max. 60°C for five minutes
Discharge sizes	2”, 3” BSP threaded connections
Maximum speed of rotation	3,450 rpm
Rated power	0.37 – 3.0 kW / 0.5 – 4.0 cv (only 60Hz motors available)