SUBMERSIBLE WASTEWATER PUMP TYPE ABS SCAVENGER EJ

Clog-free flow in sewage and raw water

Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 65 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.

Main benefits

Hydraulics with Contrablock system or vortex impellers for clog-free operations
Unique triple seal design for outstanding reliability
Suitable for portable as well as in stationary installations
Easy to lift by using the handle (weight-balance position)
Motor and shaft seal monitoring system as an option
Low noise operation
Reduced maintenance cost

Main applications

Sewage and wastewater containing fecal matter
Removal of raw water and wastewater with viscous and fibrous matter
Drainage of garages and flooded cellars
Light agricultural usage (pumping of liquid manure and slurry)

Main design features

Three-phase centrifugal pump
Protection type IP 68
Double carbon/ceramic mechanical seal
Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models)
Double mechanical seal in the oil chamber
Ball bearings lubricated by insulating nontoxic oil
Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models)
Free solids passage: 45 to 65 mm
Rugged cast iron construction (EN-GJL-250: GG25)
Stainless steel fasteners and motor shaft (AISI 420)
Power cord inlet sealed with rubber and epoxy resin
Standard 7 meter PVC cable

Key characteristics

Capacities	Up to 109 m³/h / 480 US gpm
Heads	30 m / 98 ft
Temperatures	40°C / max. 60°C for five minutes
Discharge sizes	3” ANSI 125 / DN 75 NBR 7675 horizontal flange
Maximum speed of rotation	3,450 rpm
Rated power	0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)