Description
Main benefits
- Plug-and-pump installation
Plug in without worrying about overheating. Built-in contactor and thermal sensors protects the motor from overheating. Pumps with a built-in AquaTronic unit will electronically adjust for incorrect phase order, ensuring correct impeller rotation. - Reliable and trouble-free operation
Equipped with a free flow vortex impeller and a pump volute, the XJS is perfect for pumping sludge and water mixed with solids. The pump design, robust construction and premium materials ensure high wear resistance. The impeller is available in different sizes to meet your specific requirement. Min impeller diameter for duty with low water level or intermittent dry running. Max impeller diameter requires half motor or more submersed for continuous duty. (Pump can operate lying down) - Serviceability
The modular design of the pump range saves cost by ensuring maximum pump availability with a smaller spare parts inventory.The condition of a pump with a built-in AquaTronic unit can rapidly be checked without disassembly, using its service software. - Saves energy and the environment
The high-efficiency motor and hydraulics are combined with low friction bearings to reduce power losses. You achieve low total energy costs and minimize your carbon footprint. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.
Product information
Submersible Sludge Pump XJS 50 – 50Hz
Models
| XJS 50 D -160 3-phase |
| XJS 50 D -160 AT* 3-phase |
| XJS 50 D -175 3-phase |
| XJS 50 D -175 AT* 3-phase |
| Weight: 59 kg |
*AquaTronic: Built in electronic pump control.
Specification
Electric submersible pump
| Maximum submergence | 20 m |
| Protection class | IP 68 |
| Max. temperature of pumped medium at max. power input and continuous duty | 40ºC |
| Max. medium density | 1.100 kg/m3 |
| pH of the pumped medium | 5-8 |
| Free passage | 45 x 55 mm |
| Max number of starts | 30/hour |
| Motor rating P2 | 5.6 kW |
| Speed | 2930 rpm |
| Power cable | 20 m type S1BN8-F |
Starting Method and Motor Protection
XJS 50 AT: Direct on line start (DOL 500-550 V) with built in AquaTronic unit, which automatically adjusts phase order by dual contactors, ensuring correct motor rotation.
Soft start is built in with the AquaTronic unit at 230-400 V, where three thyristors reduces start current to three times the nominal current. Here two relays ensure correct motor rotation.
The AquaTronic unit monitors motor temperature, by use of NTC thermistors built into stator windings, and stops the motor at high temperature. It will also stop the motor at high amperage or if a phase is missing.
XJS 50: Direct on line start with built in contactor. Pumps to be used with VFD or 1000 V must have terminal block instead of contactor. Thermal switches (140 ºC, ±5) built into the stator windings are connected to the contactor and stops the pump at high temperature.
Discharge Connections
| 2 1/2”, 3” (standard), 4” hose connections |
| 2 1/2”, 3”, 4” G/B.S.P. threaded connections |
